LAN Phone 101/201 User Manual Guide
Document Ver.: 2.0
LAN Phone Ver:lp2.100.
32
17. [support] command
1.
: display current SUPPORT values configurations.
2.
-fstart
: enable or disable fast start (
support –fstart 0/1
, 0 for disable and 1 for enable.)
3.
-tunnel
: enable or disable H.245 tunnel function.(
support –tunnel 0/1
, 0 for disable and 1
for enable)
4.
-h245fs
:set if open H.245 separate channel after fast start or not. (
support –h245fs 0/1
, 0
for open and 1 for not.)
18. [bureau] command
Type
bureau
can display commands below.
1.
: display bureau line information and configuration.
2.
-hold
: set hold tone generation on or off. If other terminals support H.450 hold function, and
Note: When fast start function is enabled, if user wants to send DTMF message after
connection, LAN Phone will send out Q.931 message. (Please refer to
11.sysconf –keypad
command, which can only set keypad as q.931 message at this time)
