LAN Phone 101/201 User Manual Guide
Document Ver.: 2.0
LAN Phone Ver:lp2.100.
9
1.
Transfer a call by H.450 transfer function. Press TRANSFER button in communication and
press phone No. which user want to transferred to can transfer this call .
2.
Change characters to be capital or lowercase: when press TRANSFER before press letters
can switch type of letters.
REDIAL
: Redial the last outgoing call.
+ and - : Adjust the voice volume in communication.
SPEAKER
: Speaking without picking up handset.
Note: All function keys mentioned above (except Number 1 –10, * and # ) are effective only in IP
Phone mode.
2.Back View
DC 9V
: DC 9V power input outlet
LAN
: RJ-45 connector, connected directly to the
Hub
through the
straight
CAT-5 cable.
PC
: RJ-45 connector, connected directly to the
PC
through the
straight
CAT-5 cable
Line
: RJ-11 connector, connected directly to the PSTN analog line.
Note: There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port. When
network status is in normal, LED of LINK/ACT will be flashing; when transmit rate is in 10
mbps/100mbps, LED of 10/100 will light off/on .
