LAN Phone 101/201 User Manual Guide
Document Ver.: 2.0
LAN Phone Ver:lp2.100.
33
execute hold function when connecting with LAN Phone 101/201, user will hear hold tone from
LAN Phone 101/201. (0 for off ,1 for on)
19.[rom] command
1.
: show versions of all rom files.
2.
-app
,
-boot
,
-dsptest
,
-dspcore
,
-dspapp
,
-rbpcm
and
-htpcm
: upgrade main boot code,
main application code, DSP testing code, DSP kernel code, DSP application code, Ring
Back Tone PCM file and Hold Tone .
3.
-boot2m
:to upgrade 2mb rom file, which includes all firmware file mentioned in item 2.
Note:
1. After 2mb file download is finished, all configurations might change to default value,
user has to configure again.
2. MAC address might change to default value also, please
MUST
use command
setmac
:
Usage: key in command
setmac
key in MAC address with format: 0001a800xxxx
4.
-s
: it is necessary to prepare TFTP/FTP server IP address for upgrading firmware rom file.
5.
-f
: the file name prepared for upgrading is necessary as well.
6.
–server
: specify TFTP/FTP server IP address. It is corresponding to LCD configuration
-firmware upgrade-Set file Server IP.
7.
–method
: specify download method to be TFTP or FTP(0 for TFTP.1 for FTP)
8.
–ftp
: specify user name and password for FTP download method
For example: User prepares to upgrade the latest app rom file – wtlp.103c, the TFTP server is
192.168.4.101/201.
rom –app –s 192.168.1.1 –f lp.100
(If –server is specified , can just type
rom –app –f lp.100
)