![background image](http://html1.mh-extra.com/html/welltech/3802-fxo/3802-fxo_manual_955908049.webp)
49
WellGate 3804 User Manual
Start function can shorten the connection time if the opposite
party also support FastStart.
-tunnel
to switch ON/OFF (1 = ON; 0 = OFF) H.245 tunneling function.
If the function is ON, WellGate FXO GateWay will send H.245
(Call Control messages) via H.225’s (Call Signal messages) link.
The function is effective only when both side support h245
tunnel.
-h245fs
to set if open H.245 separate channel after fast start or not. (1 =
ON; 0 = OFF)
Note:
1. it is not recommended to change the value in this command, only if users
do know well the application. This might cause incompatibility with other
devices.
2. If user wants to use T.38 fax under fast start mode, please make sure
“h245fs” function is enabled, or fax can’t work normally.
5.20 [group] command
This command is for grouping 4 ports of WellGate FXO GateWay. If users
need to register at least 2 numbers separately to gatekeeper, then this
command is needed for such an application.
-------------------------------------------------------------------------------------------------
usr/config$ group
PSTN side grouping information and configuration
Usage:
group -print | -enable | -disable |
-number group_number -pattern pattern_numbers -e164 e164_numbers |
-pattern pattern_numbers -e164 e164_numbers |
-e164 e164_numbers
Comment:
-print
: Print current group configuration
-enable
: Enable PSTN Grouping
-disable
: Disable PSTN Grouping
-number
: Set number of divided groups
-pattern
: Set number of members in each group
-e164
: Set E.164 number for each group
Example:
group -print
Summary of Contents for 3802 FXO
