43
WellGate 3804 User Manual
-e164
e164 number, which is registered as phone number in
gatekeeper.
-alias
h323 ID, a identification in h323 world for other parties’
recognition. The field might be used as a key of authorization or
accounting in some VoIP application. It is recommended to assign
a special name, or it might conflict with other devices.
-gkdis
Switch ON or OFF gatekeeper discovery function (1 = ON; 0 =
OFF). When it’s ON, WellGate FXO GateWay will send GRQ with
GK ID to default gatekeeper. If the GK ID didn’t matched, GW will
send GRQ with GK ID in multicast.
-rtp
to allocate RTP port range—NOT RECOMMENDED. This may be
used when RTP port range conflicts with Firewall policy.
-h225 Configure H225 RAS port number manually.(N/A).
-q931 Configure H225 Signal port number manually.(N/A).
-ttl
to set timer for TTL(Time To Live). WellGate FXO GateWay would
send RRQ, with keepAlive, to gatekeeper periodically according
to TTL timer.
-gkfind
gatekeeper finding port. Port number, which WellGate FXO
GateWay uses it to discover a gatekeeper. Default value is 1718.
-gwtype
to set WellGate FXO GateWay register mode as terminal or
gateway,0 as terminal 1 as gateway. Please notice that if set
WellGate FXO GateWay as terminal mode, must set
sysconf –2nddial 1(refer to 5.12).
-ras
to set default gatekeeper RAS port number. Default value, 1719,
is well-known port for RAS communication.
-range
to allocate dynamic port range, which WellGate FXO GateWay
might be using.
-respto
response timeout. Max waiting time for 1st response to a new call
(1~200).
-connto
connection timeout. Max waiting time for call establishment after
receiving 1st response of a new call (1~20000).
5.15 [gk] command
This command is to configure embedded simple gatekeeper related
parameters. If user doesn’t have a gatekeeper or WellTech Call Manager,
WellGate FXO GateWay provides a simple embedded gatekeeper for up to
10 endpoints.
------------------------------------------------------------------------------------------------
usr/config$ gk
Gatekeeper information and configuration
Usage:
gk [-add type1 [[type2]...]] [-delete h323] [-ttl value
[-enable 0/1] [-security enable/disable]
Display the enabled debug flags.
Summary of Contents for 3802 FXO
