![background image](http://html1.mh-extra.com/html/welltech/3802-fxo/3802-fxo_manual_955908022.webp)
22
WellGate FXO GateWay User Manual
S/W version:x4fxo.116a
3.2 Peer-to-Peer Mode
Peer-to-Peer Mode allows users to call other VoIP devices without using a
gatekeeper. When in Peer-To-Peer mode, WellGate FXO GateWay will send
SETUP message directly to the destination IP address once the dial is finished.
Users have 2 methods of dial. One is IP dialing, and the other is Phonebook dial,
which we will describe later. When using IP address as destination phone number,
press “*” as “.” in IP address expression, and press “#” when dial is finished. When
using Phonebook, users can dial predefined phone number, and press “#”
(optional, to accelerate the dial) as end of dial.
To configure Peer-To-Peer Mode in WellGate FXO GateWay, follow the steps
below:
1. Set Peer-To-Peer Mode, using “h323” command
-------------------------------------------------------------------------------------------------
usr/config$ h323 – mode 1
Note: mode 1 is for Peer-To-Peer (non-gk) mode, while mode 0 is for GK
mode.
2. Configure Phonebook, using “pbook” command.
Users can refer to chapter 5.11 [pbook] command for more information.
-------------------------------------------------------------------------------------------------
usr/config$ pbook – add name TEST1 ip 10.1.1.1 e164 10
Note: the command is to add a record onto Phonebook. After the command
completed, you can type “pbook –print” to see if the input record is correct.
When adding a record to Phonebook, users do not have to reboot the
machine, and the record will be effective immediately.
Summary of Contents for 3802 FXO
