![background image](http://html.mh-extra.com/html/welltech/3701a/3701a_manual_955898086.webp)
FXSO H.323 Gateway User Manual
Document Ver.: 2.1a
Release Sep., 2003
Copyright (c) 2002 Welltech Computer Co. Ltd.
84
Note:
For tone simulation, Gateway adopts dual frequencies as traditional
telephone does. If users want to have their own call progress tone, they
can change the value of tones. High and Low frequency/level/cadence
can be configured respectively.
-ring
to set RING tone value.
The played tone type, when Gateway is receiving a call.
-rbt
to set RingBackTone value
The played tone type, when Gateway receives a Q.931 Alerting
message. In condition that Gateway is the originate side.
-bt
to set BusyTone value.
The played tone type, when destination is busy.
-dt
to set DialTone value.
The played tone type, when hook off a phone set of workable
Gateway.
-flash set the detective flash range in ms, for example, 300-500 ms.
4.2.20 [tone]
This command is basically for FXO ports.
-----------------------------------------------------------------------------------------------
usr/config$ tone
Disconnect tone and remote ring back tone configuration
Usage:
tone [num][freqHi ][freqLo ][freqHiLev][freqLoLev]
[Tone1ON][Tone1OFF][Tone2ON ][Tone2OFF ]]
tone -print Display disconnect tone configuration.
[num] Tone index(1~4:Disconnect tone / 5~8:Remote ring back
tone).
Example:
tone -print
tone 1 620 480 8 8 50 50 1023 1023
usr/config$