FXSO H.323 Gateway User Manual
Document Ver.: 2.1a
Release Sep., 2003
Copyright (c) 2002 Welltech Computer Co. Ltd.
69
-gkfind
gatekeeper finding port. Port number, which Gateway uses it
to discover a gatekeeper. Default value is 1718.
-gkras
to set default gatekeeper RAS port number. Default value,
1719, is well-known port for RAS communication.
-h225
to specify H.225 RAS port number.
-q931
to specify H.225 signal port number.
-dstq931
to specify destination H.225 signal port number.
-range
To allocate port range (1500-65535) Gateway may use it.
-respto
Maximum response time out
-connto
Maximum connection time out
-passwd
set H.235 security password. If user’s GK need H.235
security token password to authenticate, user have to input
topen password in this command. (please refer to your
retailer of GK for information about token password if they
implement this function in their GK)
Note: From –rtp to –conneto commands are for advanced users, please
do not change the default settings if not necessary.
4.2.13 [line]
This command is for configure each line parameters of Gateway.
----------------------------------------------------------------------------------------------
usr/config$ line
Gateway line information and configuration
Usage:
line -config number [hunt number][hotline number][forward number]
line -print Gateway line information.
hunt Hunting group.
hotline Hot line configuration.
forward No answer forward for FXS line.
Example:
line -config 1 hunt 1 hotline 1003 forward 1002
usr/config$
Parameter Usages: