FXSO H.323 Gateway User Manual
Document Ver.: 2.1a
Release Sep., 2003
Copyright (c) 2002 Welltech Computer Co. Ltd.
60
usr/config$
Parameters Usage:
-print
print out current [ifaddr] settings and status
-ip
assign IP address for Gateway
-mask
assign internet subnet mask
-gate
assign IP default gateway
-dhcp
Enable/Disable Dynamic Host Configuration (1 = ON; 0 =
OFF)
-sntp
Simple Network Time Protocol (1 = ON; 0 = OFF) When
SNTP function is activated, users have to specify a SNTP
server as network time source. An example is demonstrated
below:
-timezone
set local time zone according to GMT
-----------------------------------------------------------------------------------------------
usr/config$ ifaddr -sntp 1 10.1.1.1
10.1.1.1 stands for SNTP server’s IP address.
-ipsharing
To specify a global fixed IP address, user can add this IP
address in the command.
usr/config$ ifaddr -ipsharing 1 210.11.22.33
If the IP address is not a fixed one, the dedicated IP
address is not necessary in the command. However,
dynamic IP Address is not working in Peer-to-Peer mode. It
only supports Welltech Call Manager.
-----------------------------------------------------------------------------------------------
usr/config$ ifaddr -ipsharing 1
-ipchange This is for a special function of IP-Sharing. Some devices
could support different ip address from WAN and DMZ port.
This function has to be enable if the ip address of DMZ port
is different from the WAN port.