FXSO H.323 Gateway User Manual
Document Ver.: 2.1a
Release Sep., 2003
Copyright (c) 2002 Welltech Computer Co. Ltd.
73
route -fxs dst 2
route -fxo dst 0 e164 x
route -modify 1 prefix 100 dst 0 e164 1001 min 1 max 3 hunt 1
route -delete 1
usr/config$
Parameter Usages:
-print
print out all routing table information
-add
add a routing rule in routing table. User can add less than 50
rules. (
route –add prefix “prefix number” dst “destination
port type” e164 “e.164 number of port” min “minimum
digits needed” max “maximum digits can’t be
exceeded”
)
-delete
delete a routing rule in routing table (
route –delete “index of
routing rule”
)
-modify
modify a routing rule in routing table. (
route –modify “index
of routing rule” prefix “prefix number” dst “destination
port type” e164 “e.164 number of port” min “minimum
digits needed” max “maximum digits can’t be
exceeded”
)
-ip
create routing table for incoming call from IP side. (
route –ip
dst “destination port type” e164 “e.164 number of port”
)
-fxs
create routing table for incoming call from FXS TELs.
(
route –fxs dst “destination port type” e164 “e.164
number of port”
)
-fxo
create routing table for incoming call from FXO Lines.
(
route –fxo dst “destination port type” e164 “e.164
number of port”
)
prefix
prefix of dialed number
dst
destination port, 0 means FXS TELs, 1 means FXO Lines, 2
means IP side, x means no determinate number.
e164
destination e.164 number. This only need to be set when
routed port is FXS TELs or FXO Lines to determine which
port will this call be routed to.
min
minimum digits needed.
max
maximum digits needed.
hunt
set hunt method for busy forward. 0 means no hunting, 1