background image

 

 

Echolife ONT 

Quick Start 

Safety Information 

To use the device properly and safely, read the safety precautions carefully before using the device and 

strictly observe these precautions when using the device. 

Safety precautions: 

l

 Store devices and accessories in temperature –10°C to +35°C and relative humidity 30%–85% 

RH for at most 9 months. If the ambient temperature or relative humidity is overhigh or overlow, 

the device may be faulty. 

l

 Used only indoors. Do not lead metallic cables, such as network cables and telephone lines 

outdoors. 

l

 Do not look directly into the optical port without eye protection. 

l

 Keep the device out of the reach of children as the components or accessories may be 

swallowed. 

l

 Install the device in strict compliance with the requirements of the supplier. Reserve a space of at 

least 10 cm above and around the device for heat dissipation. During the installation, keep the 

device away from electric appliances that generate 

strong magnetic or electric fields, such

 as 

microwave ovens, refrigerators, and mobile phones. 

l

 The described input voltage range should comply with the local power grid. For example, the 

input voltage of the adapter is 200–240 V AC for European Union; the input voltage of the 

adapter is 100–140 V AC for America. 

l

 If the power adapter is damaged and its internal circuit is exposed due to manmade factors, do 

not touch the exposed circuit, which may bring safety risks. 

l

 Only power adapters delivered with the device can be used. Otherwise, the device may be 

abnormal or unsecure. 

l

 Dry your hands before connecting or disconnecting cables. Stop the device and switch off the 

power before connecting or disconnecting cables. 

l

 Do not place any object on the device, so that the device will not be damaged due to overheating 

or deformation. 

l

 Prevent objects, such as metal, from entering the device through the heat dissipation hole. 

l

 

Switch off the power and disconnect all cables, including the power cable, optical fiber, and

 

network cable, during periods of lightning activities. The socket-outlet shall be installed near the 

power adapter and shall be easily accessible. Before use the power adapter, please check no 

damage on the adapter. 

l

 Do not lead the strength member of the optica

l fiber or other metal parts indoors. Do not install

 

telephone lines, network cables, power adapters or power adapter cables outdoors. Adopting 

these measures will help prevent device damage and bodily injuries which are especially prone 

during thunderstorms. 

l

 If an abnormality occurs, for example, liquid entering the device, smoke, unusual sound, and 

smell, stop the device immediately, switch off the power, disconnect all cables (such as the 

power cable, optical cable, and network cable) to the device, and contact the authorized service 

center. 

l

 Do not disassemble the device without permission. In the case of a device fault, contact the 

authorized service center. 

l

 Dispose of the packing materials, expired batteries, and old or abandoned devices in accordance 

to local laws and regulations (recycling them is strongly recommended). 

l

 Do not change the structure, safety design, or performance design of the device without prior 

authorization. 

l

 The device should be installed and operated with a minimum distance of 20 cm between the 

radiator and your body. 

Summary of Contents for Echolife EG8245Q














Reviews: