BellEquip e-2-s User Manual Download

Page: 1 / 20

U S E R M A N U A L

Email-to-SMS (e-2-s) Gateway

05.03.2018 BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Austria • Tel.: +43 (0)2822 33 33 990 •

www.bellequip.at

Table of content

1. Quick start

2. Global Settings

  2.1 General Settings
  2.2 Email Server Mode
  2.3 Email Client Mode
  2.4 Security Settings
  2.5 Email Settings
  2.6 Heartbeat SMS Settings

3. Recipients

3.1 Recipient Directory

4. Rule-Based-Alarming

  4.1 Rule Based Alarming
  4.2 Recipient Settings
  4.3 Text Settings
  4.4 Email Subject Definition
  4.5 Valid email subject examples

5. Keyword-Based-Alarming

5.1 Group Based Settings
5.2 Group Settings 1-20

6. Backup/Restore Database

  6.1 Backup Database
  6.2 Backup Global Settings
  6.3 Restore Database & Global Settings

7. Additional interfaces for sending SMS

  7.1 SMS via Webinterface
  7.2 SMS via Telnet/SSH-session
  7.3 SMS via HTTP API
  7.4 SMS via AT-commands over TCP-session

8. Setting up a POP3 mailbox on an Exchange Server

9. Technical parameters of e-2-s gateway

Summary of Contents for e-2-s





















Search results

Summary of Contents for e-2-s

Reviews:

Related manuals for e-2-s

Brands by name

Popular brands

BellEquip e-2-s, User Manual

Search results

Summary of Contents for e-2-s

Reviews:

Related manuals for e-2-s

Brands by name

Popular brands