manualshive.com logo in svg

WELLTECH 3701A, Manual, Page: 63 / 101

Share
Download
WELLTECH 3701A Manual Download Page 63

FXSO H.323 Gateway User Manual

Document Ver.: 2.1a

                                                                                                                                                        Release Sep., 2003

Copyright (c) 2002 Welltech Computer Co. Ltd.

61

-----------------------------------------------------------------------------------------------

usr/config$ ifaddr -ipchange 1

-cmcenter

Specify a management center IP Address. Welltech will 
provide a management center program to do centralized 
control for all devices.

4.2.8 [time]

When SNTP function of Gateway is enabled and SNTP server can be 
found as well, type 

time

command to show current network time.

-----------------------------------------------------------------------------------------------

usr/config$ time
Current time is THU JAN 01 05:29:23 1970

4.2.9 [ping]

Use 

ping

to test whether a specific IP is reachable or not.

For example: if 192.168.1.2 is not existing while 192.168.1.254 exists. 
Users will have the following results:

usr/config$ ping 192.168.1.2
no answer from 192.168.1.2
usr/config$ ping 192.168.1.254

PING 192.168.1.254: 56 data bytes
64 bytes from 192.168.1.254: icmp_seq=0. time=5. ms
64 bytes from 192.168.1.254: icmp_seq=1. time=0. ms
64 bytes from 192.168.1.254: icmp_seq=2. time=0. ms
64 bytes from 192.168.1.254: icmp_seq=3. time=0. ms
----192.168.1.254 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms)    min/avg/max = 0/1/5
usr/config$

Summary of Contents for 3701A






































































































Reviews:

No comments