Well WRC5000N, User Manual

Page: 76 / 228

WELL WRC500N / WRC5010N / WRC5010NU
76
Field Description
Disable
Wireless LAN
Interface Enable/Disable the Wireless LAN Interface.
Default: Disable
Band Specify the WLAN Mode to 802.11b/g Mixed mode, 802.11b mode or
802.11g mode
Mode Configure the Wireless LAN Interface to AP, Client, WDS, AP + WDS,
MESH or AP + MESH mode
Network Type Configure the Network Type to Infrastructure or Ad hoc.
ESSID Specify the network name.
Each Wireless LAN network uses a unique Network Name to identify the
network. This name is called the Service Set Identifier (ESSID). When
you set up your wireless adapter, you specify the ESSID. If you want to
connect to an existing network, you must use the name for that
network. If you are setting up your own network you can make up your
own name and use it on each computer. The name can be up to 20
characters long and contain letters and numbers.
Channel Width Choose a Channel Width from the pull-down menu.
Control
Sideband Choose a Control Sideband from the pull-down menu.
Channel
Number Choose a Channel Number from the pull-down menu.
Broadcast
ESSID Broadcast or Hide ESSID to your Network.
Default: Enabled
WMM Enable/disable the Wi-Fi Multimedia (WMM) support.
Data Rate Select the Data Rate from the drop-down list
Associated
Clients Show Active Wireless Client Table
This table shows the MAC address, transmission, receiption packet
counters and encrypted status for each associated wireless client.
Enable Mac
Clone (Single
Ethernet Client) Enable Mac Clone (Single Ethernet Client)
Enable
Universal
Repeater Mode Acting as AP and client simultaneously
ESSID of
Extended
Interface When mode is set to “AP” and URM (Universal Repeater Mode ) is
enabled, user should input ESSID of another AP in the field of “ESSID
of Extended Interface”. Please note, the channel number should be set
to the one, used by another AP because 8186 will share the same
channel between AP and URM interface (called as extended interface
hereafter).