WELL WRC500N / WRC5010N / WRC5010NU
221
in on your DNS server (usually located with your ISP). If that
name is not an entry in your ISP’s DNS table, the request is
then referred to another higher-level server, and so on, until the
entry is found. The server then returns the associated IP
address.
On Windows-based computers, you can execute the nslookup
command from the
Start
menu. Click the
Start
button, and then
click
Run
. In the
Open
text box, type the following:
Nslookup
Click
OK
. A Command Prompt window displays with a bracket
prompt (>). At the prompt, type the name of the Internet address
that you are interested in, such as
www.microsoft.com
.
The window will display the associate IP address, if known, as
shown below:
Figure 18:
Using the nslookup Utility
There may be several addresses associated with an Internet
name. This is common for web sites that receive heavy traffic;
they use multiple, redundant servers to carry the same
information.
To exit from the nslookup utility, type
exit
and press
[Enter]
at
the command prompt.
Summary of Contents for WRC5000N
