Enterprise IP Phone Advanced Phone Functions
70
3)
You are prompted to confirm the change, press
OK
to confirm the changes,
press
Cancel
to cancel the operation.
Note:
Please do not power off during reboot, or it will cause the flash memory error.
Reset to Factory
You should reset the phone only in this case: the phone configuration was changed
and the phone is not functioning anymore. To maintain the configuration of the
phone, you need your system administrator or service provider’s advice.
To reset to factory via phone interface:
1)
Press the
Menu
->
Settings
->
Advanced
Settings
.
2)
You are prompted to enter the required password, the default one is
admin
.
3)
Scroll to
Reset to factory
option, and press
Enter
hot key to enter the
configuration interface.
4)
You are prompted to confirm the change, press
OK
hot key to reset to factory
settings, or press
Cancel
hot key to return to previous menu.
5)
It will take a few minutes to reset, please do not power off during resetting, or it
will cause flash memory error.
Note:
The reset to factory option must in the admin mode.
To reset to factory via Web interface:
1)
Click on
Upgrade
->
Basic
.
2)
Click
Reset
button.
3)
You are prompted to confirm the change, press
OK
to confirm the changes,
press
Cancel
to cancel the operation.
Note:
If you confirm all current setting changes including contact list, call history, account
settings, etc will be lost, you need to export the configuration first if you still want
to import the old configurations after reset. Or your phone must be configured a
new manually unless mass provisioning is used!
To Export/Import the old configuration file via Web interface:
1)
Click on
Upgrade
->
Advanced
, select
Export
/
Import
Config
, click on
Export
button to export the file to your local computer.
2)
Click on
Upgrade
->
Advanced
, select
Export
/
Import Config
, click on
Browse
button, select the specific configuration file in your local computer, click
on
Import
button.
3)
It will take a few minutes to reset, please do not power off during resetting, or it
will cause flash memory error.
