THE WELL BUBBLER
WWW.WELLBUBBLER.COM
DIGITAL DISPLAY
The Well Bubbler includes a digital display used to view well level, flow rate, pump
discharge pressure and pump current. The same display is used to start, or stop,
automatic measurement and to configure the Well Bubbler. The display includes three
buttons: a center round button, the right rectangular button, and the left rectangular
button.
Center (round) button: press this button once to turn on the back light; this feature is
useful in low light, and will turn off automatically to conserve energy. Press the center
button again to move, or toggle, between different menus.
Right: press this button to increase a setting, such as the display contrast
Left: press this button to decrease, or lower, a setting
Most menu items are used to configure the Well Bubbler, and are accessed through a
special button sequence - this prevents unauthorized access to important settings.
Press, and continue to hold, the center round button, then press and hold the right
button. After five seconds, the configuration menus become available temporarily.
DRAWN BY: A. BUGROV
DATE: 02.20.2021
PAGE: 6