THE WELL BUBBLER
WWW.WELLBUBBLER.COM
CONFIGURATION: PUMP CURRENT SENSOR
The Well Bubbler can be used to measure and record the pump current using a current
transducer with a 4-20mA output. Enter the sensor’s rating here, or set the parameter
to zero to disable this feature.
If this 4-20mA sensor is configured, and at least 4.0mA is not detected by the Well
Bubbler, the unit will display an error, indicating that the sensor cannot be read.
Note that some 4-20mA sensors will produce slightly less than 4.0mA at rest (for
example, 3.95mA). This will result in an error, until the sensor output exceeds 4.0mA.
DRAWN BY: A. BUGROV
DATE: 02.20.2021
PAGE: 28