THE WELL BUBBLER
WWW.WELLBUBBLER.COM
CONFIGURATION: DISCHARGE PRESSURE SENSOR
The Well Bubbler can be used to measure and record the pump discharge pressure
using a transducer with a 4-20mA output. Enter the sensor’s rating here, or set the
value to zero to disable the feature.
If this 4-20mA sensor is configured, and at least 4.0mA is not detected by the Well
Bubbler, the unit will display an error, indicating that the sensor cannot be read.
Note that some 4-20mA sensors will produce slightly less than 4.0mA at rest (for
example, 3.95mA). This will result in an error, until the sensor output exceeds 4.0mA.
DRAWN BY: A. BUGROV
DATE: 02.20.2021
PAGE: 27