Welch Allyn MicroTymp 3 Handle, Directions For Use Manual

Page: 71 / 76

Directions for use Specifications 71
Recomme n ded Sepa r atio n Dista n ces Betwee n Po r table a n d Mobile RF Comm un icatio n s Eq u ipme n t a n d the Mic r oTymp 3
The MicroTymp3 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or user
of the MicroTymp3 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the MicroTymp3 as recommended below, according to the maximum output power of the
communications equipment.
Sepa r atio n Dista n ce Acco r di n g to F r eq u e n cy of T r a n smitte r (m)
Rated Max. O u tp u t
Powe r of T r a n smitte r
(W)
150 kHz to 80 MHz
d = (1.17)
80 MHz to 800 MHz
d = (1.17)
800 MHz to 2.5 GHz
d = (2.33)
0.01 0.11667 0.11667 0.23333
0.1 0.36894 0.36894 0.73785
1 1.1667 1.1667 2.3333
10 3.6894 3.6894 7.3785
100 11.667 11.667 23.3333
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated
using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures,
objects, and people.
P P P