7.
Clip the suction panel and rack back into place.
8.
Close the appliance door.
9.
Wait for the wash cycle to finish (about 10 minutes).
10.
An audible signal is given when the wash cycle is finished.
You are prompted to rinse off the cooking chamber.
11.
Open the appliance door.
12.
Hinge the rack and suction panel outwards again into the cooking
chamber.
13.
Risk of food contamination from cleaning agent or rinse aid re-
sulting from inadequate rinsing
■
If the appliance does not have a hand shower, use an external water
spray instead of the hand shower or wipe down the cooking cham-
ber, fittings and the area behind the suction panel thoroughly with
plenty of water and a soft cloth.
Use a water spray to rinse out thoroughly the area behind the suction
panel, the suction panel, the rack, the entire cooking chamber and the
oven drain.
14.
Check the cleaning result. The cooking chamber should look clean
and not smell of leftover food or cleaning agents.
If the cleaning result is not good enough, either clean and rinse the
cooking chamber manually or run a cleaning profile again.
15.
Clip the suction panel and rack back into place.
16.
Leave the appliance door ajar to let the cooking chamber dry out.
5 Cleaning procedures
User manual
84
