WEISS HP140, Operating Instructions Manual

Page: 5 / 48

WAS.handling Electro Documentation
2
1.2 Safety Instructions
Validity:
These instructions apply for the WEISS control system HP140T with B&R servo drive ACOPOS 8V1010.50-2.
Importance of the operating instructions:
This manual contains important information for working safely with the control system. It contains safety
instructions which must be observed as well as information necessary for trouble-free operation.
The operating instructions must be kept with the device. It must be ensured that all persons who work at the
device have access to the operating instructions at all times.
In addition to the operating instructions for the control system, the operating instructions for the mechanics, as
well as the operating regulations subject to the labour protection laws must also be provided.
The operating instructions must be kept in a safe place for further use and must be passed on to every
subsequent owner, user and end customer.
The HP140 may only be started up when the whole machine and control system, in particularly the safety
system, correspond to the machinery directive 98/37/EC.
Target group:
The operating instructions are aimed at persons who are involved in the planning, installation, starting-up, and
maintenance of the system and who have the qualifications and know-how appropriate for this work. Qualified
personnel are persons who have the necessary qualifications and who are familiar with the execution of the
work cited above and the operation of the system. All work in other areas such as transport, storage and
disposal must be carried out by persons with the appropriate training.
General:
Prior to installation and starting up, please carefully read and observe all safety instructions, technical
documentation and connection data accordingly. National accident prevention regulations and all internal
company regulations must be observed.
Never install or operate damaged products.
The devices must be installed and cooled in accordance with these regulations.
The control system (PLC and servo drive) must be protected against overloading. The servo amplifier and PLC
contain electrostatically sensitive components that can easily be damaged by improper handling. Electrical
components may not be mechanically damaged or destroyed (possible health risk).
Danger!
In the case of unauthorized removal of the necessary cover, inappropriate usage,
incorrect installation or operation, there is a risk of serious personal injury or
material damage.
Warning!
Depending on the type, some of the components (motor, servo drive) may have
hot surfaces during operation. Operating temperatures > 60 °C (> 140 °F) can
occur. Skin contact will cause burns.