61
Installation and Operating Instructions
Gas burner WG20.../1-C ZM-LN (W-FM 25)
83055116 • 1/2016-05
8 Maintenance and service
u
Press [+].
a
The setting level (parameter
E0
) is displayed.
u
Select value
0
(single fuel burner), if necessary, adjust using [Enter] and [-] keys.
u
Press [+].
a
E1
is displayed.
The value of the
E1
cannot be altered.
•
0
= intermittent operation (Standard).
•
1
= continuous operation.
u
Press [+].
a
E2
is displayed.
u
Select value
0
(ionization electrode), if necessary, adjust using [Enter] and [-] keys.
u
Press [+].
a
E3
is displayed.
u
If required, set the value
1
(blower control) using [Enter] and [+] keys.
u
Press [+].
a
The combustion manager changes into the setting level for the step points.
u
Determine the operating points from the commissioning record.
u
Set the burner using these operating points and adjust.
Deactivate the E-Parameters
Following commissioning, set the parameter
E
to
OFF
.
u
Press [Enter] and [+] keys simultaneously for approx. 2 seconds.
a
The parameter level is activated.
u
Press [+].
u
Press [Enter] key until parameter E is displayed.
u
Set parameter
E
to
OFF
.
a
E-Parameters are not shown in the setting level.
u
Press [Enter] key twice.
a
The combustion manager returns to the operating level.
