Weir Warman 650 M200-MCR-G, Manual, Page: 153 / 287

18 / 89
BA 5010 EN 03.10
Fig. 7: Attachment points on gear­units types B3.H / T3.H with auxiliary drive
A detailed view of the gear unit can be obtained from the drawings in the gear-unit documentation.
4.3 Storing the gear unit
The gear unit must be stored in the position of use in a sheltered place; it must be placed on a vibration­free,
dry base and covered over.
When temporarily storing the gear unit and any single components supplied
with it, the preservative agent should be left on them. It must not be damaged,
otherwise there is a risk of corrosion.
Do not stack gear units on top of one another.
If the gear unit is being stored out of doors, it must be particularly carefully
covered, and care must be taken that neither moisture nor foreign material can
collect on the unit. Waterlogging should be avoided.
Unless otherwise agreed by contract, the gear unit must not be exposed to harmful
environmental factors such as chemically aggressive products.
Provision for special environmental conditions during transport (e.g. transport by ship)
and storage (climate, termites, etc.) must be contractually agreed.