WEIGL ProCommander 2, Instruction Manual

Page: 32 / 87

Modification of the menu of ProCommander LTC
32
LEVEL 3 locate under 5.2.1 MainSetup – LEVEL 2 following
functions: Set IP-Adrs – LEVEL 3, Set Port – LEVEL 3 and Set
Factory – LEVEL 3.
Set IP-Adrs – LEVEL 3
With the function "Set IP-Adrs" you can change the IP address
of the ProCommander LTC. You have to activate "Set IP-Adrs" by
pressing Enter.
In the first line of the display "Set IP-Adrs:" appears, this
corresponds to the LEVEL 4 of the menu plan. The second line of
the display shows the current value and corresponds to LEVEL 5
of the menu plan.
Move the joystick to the right or left to change the requested
digit. The underscore below a digit indicates which can be
changed. You have to move the joystick up or down to adjust a
value between 0-9. Once you have set the requested IP-Address,
confirm with Enter.
By moving the joystick to the left, you can return to a parent
LEVEL.
Set Port – LEVEL 3
With the function "Set Port" you can change the values of the
ports 1-4 of the ProCommander LTC. Therefore you have to
activate "Set Port" by pressing Enter.
In the first line "Port 1 Value" is displayed, this corresponds to
the LEVEL 4 of the menu plan. The second line of the display