WEIGL ProCommander 2, Instruction Manual, Page: 33 / 87

Modification of the menu of ProCommander LTC
33
shows the current value and corresponds with LEVEL 5 of the
menu plan.
For example you want to change the value of port 3, you have
to move the joystick up until "Port 3 Value" is displayed. Now,
port 3 is active, now you can change the value of port 3.
Therefore you have to move the joystick to the right until you
are in the second line of the display. You will see a line below the
digits. Now you can select a value between 0-9 by moving the
joystick up or down. With the movement of the joystick to the
left and right you can switch between the current digits. Once
you have changed the parameters of the current ports according
to your wishes, confirm the entry by pressing Enter.
By moving the joystick to the left, you can return to a parent
LEVEL.
Set Factory – LEVEL 3
With the function "Set Factory" you can restore to factory
settings of the ProCommander LTC. Therefore you have to
activate "Set Factory" by pressing Enter.
You will be automatically be forwarded to LEVEL 4 of the
menu plan. If you confirm "Set Factory?" with Enter, the
ProCommander LTC will be automatically restored to the factory
settings.
By moving the joystick to the left, you can return to a parent
LEVEL.