WEIGL ProCommander 2, Instruction Manual, Page: 70 / 87

Control.ini
70
After each change of a variable the Control.ini file is checked,
if an event is assigned to the variable.
If this variable condition is true, the following command will
be executed.
Immediately after the input event, the command definition
has to follow.
Example:
!ess1001# → the open collector outputs 1 and 4 will be set
(see ASCII-protocol).
With the combination of the input event, it looks like this:
!i1c!ess1001#
You can assign several commands to an input event. In this
case, attach the additional commands. The total number of
characters of a command line must not exceed 150 characters.
For example with the line
!i1c!ess1001!edv10:255#
If input 1 is closed, the
open collector outputs 1 and 4 will be
activated and additionally the DMX channel 10 will be set to 255.