WEIGL ProCommander 2, Instruction Manual

Page: 52 / 87

ProCommander LTC configuration
52
If the configuration is made through network you have to be
aware, that the IP address of the computer in combination with
the subnet mask matches with the factory settings of the
ProCommander LTC.
The factory setting of the IP address is 10.0.0.101, and the
subnet mask is 255.255.255.0.
To connect your computer with the ProCommander LTC you
have to change the network settings. For this purpose you open
the network properties through the control panel.
Chose the internet protocol version 4 and press the button
"properties”.