9
6. Orient the Right and Left Dip Arms (6, 33) as
shown. Slide the Left Dip Arm onto the Right
Dip Arm.
Attach the Right and Left Dip Arms (6, 33) with
two M10 x 65mm Screws (29), two M10
Washers (30), and two M10 Locknuts (25).
6
6
33
29
7. Apply some of the included grease to the M10 x
215mm Bolt (22).
Attach the Right and Left Dip Arms (6, 33) to
the Upright (3) with the M10 x 215mm Bolt (22)
and an M10 Locknut (25).
Do not overtighten
the Locknut; the Dip Arms must pivot easily.
Attach the tether on the Pin (23) to the Upright
(3) with an M4 x 16mm Self-tapping Screw (24).
Insert the Pin (23) into the hole in the Left Dip
Arm (33) and into the Upright (3).
7
30
25
6
3
33
22
25
24
Tether
23
Grease
Hole
