8
4. Attach the Left Handle (9) to the Left Pull-up
Arm (34) with an M10 x 65mm Screw (29), an
M10 x 70mm Screw (31), and two M10
Washers (30).
Press a 50mm Round Inner Cap (12) into the
Left Pull-up Arm (34).
Make sure that the thick
side of the Cap is on the side shown.
Attach the Right Handle (8) to the Right Pull-
up Arm (7) in the same way.
5. Insert the Left Pull-up Arm (34) into the Upright
(3).
Attach the Left Pull-up Arm (34) to the Upright
(3) with an M10 x 75mm Screw (36) and an
M10 Washer (30).
Do not tighten the Screw
yet.
Attach the Left Pull-up Arm (34) with an M10 x
70mm Screw (31), an M10 Washer (30), and an
M10 Locknut (25).
Then, tighten the M10 x
75mm Screw (36).
Attach the Right Pull-up Arm (7) to the
Upright (3) in the same way.
36
31
30
25
9
8
7
30
34
31
30
29
12
Thick
Side
Thick
Side
34
3
4
7
5
