79
97
84
55
7
4.
Attach the Left Support (6) to the left Base (1)
with the indicated two M10 x 65mm Carriage
Bolts (83) and two M10 Nylon Locknuts (79).
Do
not tighten the Locknuts.
Attach an Upright Cap (34) to the Left Upright (3)
with two M4 x 16mm Screws (82).
Attach the Left Upright (3) to the Base (1) with the
indicated two M10 x 65mm Carriage Bolts (83)
and two M10 Nylon Locknuts (79).
Do not tight-
en the Locknuts
.
Identify the Guide Rods (5) and the Carriage
Guides (64) (see the inset drawing).
Attach a Guide Rod (5) to the Base (1) with an
M10 x 93mm Button Bolt (97), two M10 Washers
(84), two 25mm Spacers (55), and an M10 Nylon
Locknut (79).
Do not tighten the Locknut.
Repeat this step with the Right Support (7),
the Right Upright (not shown), the other Guide
Rod (not shown), and the other Base (1).
5.
Orient the two Carriage Guides (64) with the rings
near the bottom. Attach the Guides to the Center
Base (2) with an M10 x 154mm Button Bolt (99),
two M10 Washers (84), two 6mm Spacers (75),
and an M10 Nylon Locknut (79).
Do not tighten
the Locknut.
Slide two Guide Bumpers (27) onto the Carriage
Guides (64). Slide the Weight Carriage (41) onto
the Guides as shown.
82
82
3
5
6
7
34
4
1
1
84
83
55
79
79
83
79
5
99
84
84
79
2
75
27
41
64
64
27
5
64
