18
52. Attach the Leg Bumper (135) to the Front Leg
(109) with an M4 x 16mm Screw (82).
Attach the Leg Plate (134) to the Front Leg (109)
with an M4 x 16mm Screw (82).
Attach the Front Leg (109) to the Bench Frame
(107) with two M10 x 73mm Hex Bolts (105), two
M10 Washers (84), and two M10 Nylon Locknuts
(79).
Tighten the M8 Nylon Locknuts (78) and the
M10 Nylon Locknuts (79) used in steps 51 and
52.
54. Orient the two Backrest Frames (118) with the
indicated holes nearer the bottom. Attach the
Frames to the Backrest Bracket (111) with four
M8 x 42mm Hex Bolts (130), four M8 Washers
(94), and four M8 Nylon Locknuts (78).
Do not
tighten the Locknuts.
53. Grease an M10 x 82mm Button Bolt (106). Attach
the Leg Lever (110) to the Front Leg (109) with
the Bolt and an M10 Nylon Locknut (79).
Do not
overtighten the Locknut; the Leg Lever must
be able to pivot easily.
82
135
134
52
53
109
82
79
84
105
107
110
106
Grease
79
109
130
118
94
Holes
94
54
130
78
78
111
