15
39. Route the Long Cable (54) over a 90mm Pulley
(58). Attach the Pulley, a Small Cable Trap (63),
and two Half Finger Guards (40) to the lower hole
of the “U”-bracket (47) with an M10 x 53mm
Button Bolt (147) and an M10 Nylon Locknut (79).
Make sure that the Cable Trap is turned to
hold the Cable in the groove of the Pulley.
40. Route the Long Cable (54) under a 90mm Pulley
(58). Attach the Pulley and two Half Finger
Guards (40) to the Center Base (2) with an M10 x
46mm Button Bolt (100) and an M10 Nylon
Locknut (79).
41. Route the Long Cable (54) around a 110mm
Pulley (59). Attach the Pulley, a Long Cable Trap
(62), an M10 Washer (84), and a Large Full
Finger Guard (150) to the Center Base (2) with
an M10 x 76mm Button Bolt (102) and an M10
Nylon Locknut (79).
Make sure that the Cable
Trap is turned to hold the Cable in the groove
of the Pulley.
42. Route the Long Cable (54) under a 90mm Pulley
(58). Attach the Pulley and two Half Finger
Guards (40) to a Base (1) with an M10 x 46mm
Button Bolt (100) and an M10 Nylon Locknut (79).
54
58
63
40
40
79
147
47
39
40
2
40
40
54
58
79
100
42
41
58
79
40
40
54
1
100
79
59
84
54
150
62
102
2
38. Route the Long Cable (54) under a 90mm Pulley
(58). Attach the Pulley and two Half Finger
Guards (40) to the Center Base (2) with an M10 x
46mm Button Bolt (100) and an M10 Nylon
Locknut (79).
38
79
40
40
58
54
2
100
