16
44. Route the Long Cable (54) through the Right
Upright (4) and a Swivel Arm (32), and over a
90mm Pulley (58). Attach the Pulley inside of the
Swivel Arm with an M10 x 53mm Button Bolt
(147), two M10 Washers (84), two 6mm Spacers
(75), and an M10 Nylon Locknut (79).
45. Slide a Clip Cover (52) onto the Long Cable (54).
Hold an M6 Nylon Locknut (80) inside of a Clip
(53), and insert the Long Cable (54) into the Clip
and the Locknut. Hold the crimp on the Cable
with a pair of pliers. Insert a screwdriver between
the Locknut and the Clip. Rotate the screwdriver,
the Clip, and the Locknut together until two
threads of the Cable show past the Locknut.
Slide the Clip Cover (52) over the Clip (53).
46. Attach the Butterfly Backrest (29) to the Backrest
Upright (8) with two M6 x 64mm Screws (89) and
two M6 Washers (86).
147
84
75
75
44
45
84
79
58
54
32
4
54
52
80
53
47
29
86
89
46
8
86
89
87
86
30
30
10
11
47. Attach an Arm Pad (30) to the Right Arm (11) with
two M6 x 77mm Screws (87) and two M6
Washers (86).
Attach the other Arm Pad to the
Left Arm (10) in the same manner.
43
54
58
13
104
63
79
43. Route the Long Cable (54) over a 90mm Pulley
(58). Attach the Pulley and a Small Cable Trap
(63) to the right Side Top Frame (13) with an M10
x 49mm Button Bolt (104) and an M10 Nylon
Locknut (79).
Make sure that the Cable Trap is
oriented to hold the Cable in the groove of the
Pulley.
