Wegener iPump 562, User Manual

Page: 6 / 33

I
P
UMP
562 U
SER
’
S
M
ANUAL
6 800092-02 Rev. C www.wegener.com
The following menus are subject to change with software revisions. Some menus have an “Exit OSD” or “Done” item, but all
menus can be exited using the left arrow key on the front panel. The OSD will time out after 60 seconds if no key is pressed,
with the exception of the Signal Strength Meter. Any OSD screen may be “parked” so that it does not time out by pressing the
right arrow key and the enter key simultaneously.
Main Menu
The main menu displays the unit serial number and the currently tuned RF carrier settings, level, and Eb/No at the top.
Current Program
Displays the current program number or descriptor. It may be changed by scrolling through the list of available programs,
using the up/down keys. If the unit is currently decoding a LAN/Ethernet stream, the IP and port of the stream is displayed
here but cannot be changed here. It is selected/changed in the decoder source item of the decoder setup menu.
Audio 1 Language
Displays the current audio program descriptor or “***”, which means the first available audio, for the Audio 1 output. It may be
changed by scrolling through the list of available audio’s, using the up/down keys. If the unit is currently decoding a
LAN/Ethernet stream, this will not be in the menu and the unit will decode the first audio in the stream.
Audio 2 Language
Displays the current audio program descriptor or “***”, which means the first available audio, for the Audio 2 output. It may be
changed by scrolling through the list of available audio’s, using the up/down keys. If the unit is currently decoding a
LAN/Ethernet stream, this will not be in the menu and the unit will decode the first audio in the stream.
Subtitling Setup
Navigates to the subtitling setup menu which allows enabling/disabling of subtitling and selection of the subtitling language.
Subtitling may be enabled only if closed captioning is in the Passthru mode.
Carrier Settings
Navigates to the carrier settings menu, which allows viewing/changing the tuned RF carrier settings, LNB parameters, signal
quality alarm settings and a signal strength meter.
Advanced
Navigates to the advanced menu, which allows more detailed monitor and control functions, such as viewing software
versions, decoder setup, and audio setup.
Subtitling Setup
The subtitling setup menu allows enabling/disabling subtitling display and selection of the subtitling style and language .