23
English
DISPLAY - AVANTGARDE
ENGLISH
data reset
reset counting ?
press + 3 sec.
espresso gr1
00000000
The procedure described above makes it possible to reset the counts of the single selections (group
1-2-3, milk selections), but not to reset the machine completely (machine life cycle).
i
14.2 Resetting selection count to zero
If the machine will not work call technical assistance.
i
15.
S
ignals
1) Place the programming switch
(
1
)
in the
OFF
position
;
2) hold down the key of the left push button panel for 5 seconds;
3) place the programming switch
(
1
)
in the
ON
position ;
4) to start resetting press the key ;
5) to confirm resetting press the key for 3 seconds.
STOP
PROG.
1
1,1 atm 120°C
boiler filling
cause
solution
Boiler filled with water when using the
machine for the first time or when refill-
ing to reach the water level.
Wait for the boiler to be completely filled.
1,1 atm 120°C
filling timeout
Time for filling the boiler with water
longer then expected.
Make sure the mains cock is opened.
Switch off and on again the machine. If
the warning is still on after a few inter-
ventions call the Technical Assistance.
doser alarm
Fault of the volumetric electronic
control .
Stop brewing by pressing the dose key.
Call the Technical Assistance.
reg. softener
Lack of water softener regeneration.
Carry out the water softener
regeneration. To put off the warning turn
the programming switch on ON and
press simultaneously the 4 display keys
for 5 seconds .
If the right keypad of the machine does not work, it may be due to incorrect positioning of the program-
ming switch (set to
ON
). Make sure that the programming switch is always
OFF
.
i
