25
English
CAPPUCCINO MAKER
ENGLISH
•
Put the suction tube inside the milk
;
•
place the jug under the spout of the cappuccino maker
;
•
turn the steam tap counter-clockwise, upon reaching the desired
amount, close the steam tap
;
•
pour the foamed milk into the cups with coffee
.
C
appuccino maker
1
position
Hot milk
position
Cappuccino
To obtain delivery of warm milk without foam, lift the tab (
1
)
upwards. For better results, we suggest not dispensing directly into
the coffee cup, but into a jug or pot, then putting the foamed milk
with the coffee
.
Be sure the cappuccino maker is kept clean as described in the
chapter "Cleaning"
.
i
Cleaning
Use special care in cleaning the cappuccino maker, following the procedures indicated here:
• initially wash by placing the immersion tube in water and run a delivery for a few seconds;
• turn the rotating body (
1
) 90° to
pos.B
(closure of milk outlet duct);
• holding the aspiration tube in the air, dispense steam (cappuccino maker dry run);
• wait about 20 seconds to allow for internal cleaning and sterilisation of the cappuccino maker;
• close the steam and put the rotating body back in
pos.A
;
• if the air intake hole is blocked (
2
), clear it gently with a pin.
1
pos.
A
pos.
B
2
It is advisable to clean the cappuccino after each period of continued use so as to avoid malfunctions and
to ensure the hygiene of the system.
i
