9
English
EPU - EVD
ENGLISH
6.1 EPU version
• put the coffee cup under the dispensing spout.
•
Press the desired delivery switch. You will have the delivery which can
be stopped by means of the same switch once the desired amount of
coffee in the cup is obtained
.
6.
M
aking coffee
Dispensing
coffee
6.2 EVD version
B
A
A
COFFEE DOSE PROGRAMMING
• Turn the programming switch
(B)
to the
ON
position;
• Hold the key down for 5 seconds: all LED on the push button
panel come on;
• Press the dose key to be programmed (e.g. 1 espresso coffee );
• Wait for dispensing. To confirm the dose press the dose key or
the key again;
• Repeat this operation for the other dose keys;
• Upon conclusion of the programme, press the key until all
LEDs go off on the push button panel, and turn the programming switch
(
B
) to
OFF
.
For models with 2-3-4 groups it is possible to program simultaneously all
machine push button panels using only the right push button panel. It is
however advisable to check the programming of the other push button
panels.
COFFEE DELIVERY
• put the coffee cup under the dispensing spout;
• press the desired dose key (e.g. 1 espresso coffee ) and wait
for coffee to be delivered
(LED comes on)
;
•
to stop delivery of coffee in advance, press the delivery key again
or press the key ;
•
in the event of anomalies or if the push button panel is locked, use the
manual delivery switch
(A)
.
STOP
PROG.
STOP
PROG.
STOP
PROG.
STOP
PROG.
