WEG Drive Scan, Manual

Page: 9 / 74

2
INSTALLATION RECOMMENDATIONS
2 INSTALLATION RECOMMENDATIONS
This manual contains the necessary information for the correct installation, configuration and use of the Drive Scan.
The document was developed for professionals with suitable training or technical qualifications to operate this type
of product. Failure to comply with the product instructions may cause operating accidents and damages to the
device, in addition to voiding the warranty. The user is responsible for the correct definition of the environment and
application characteristics.
2.1 INSPECTION ON RECEIPT
When you receive the Drive Scan, please check that the package contains the items listed below. Figure Figure 2.1
shows the accessories contained in the package.
1x WCD Drive Scan,
2x WiFi antenna,
1x power supply 12V + 2x socket plug.
1x Drive Scan 1x 12VDC power supply
2x WiFi antenna
2x Socket plug
Figure 2.1: Drive Scan and Accessories
2.2 PHYSICAL INSTALLATION
Installing the Drive Scan is a simple task. Just follow the steps listed below.
1. Insert both antennas, one into each input.
2. Insert one of the power plugs (at your discretion) into the power supply and insert the cable into the Drive
Scan power input.
3. Panel Installation:
a) Place the Drive Scan on the base of the panel and energize it through an outlet.
b) Or, if possible, snap the Drive Scan onto the DIN rail on the panel.
Low Voltage Devices | 2-0