WEG Drive Scan, Manual

Page: 31 / 74

5
CONNECTING A DEVICE TO THE DRIVE SCAN
Table 5.10: Ethernet hardware accessory of the CFW300 compatible with the Modbus TCP protocol
Accessory
WEG item
Modbus TCP
clients
CFW300
firmware
Parameters
CETH 14409620
up to 4
≥
V3.00
Table 5.11
Table 5.11: Parameters related to the CETH accessories
Parameter Description Values range
P0850 IP address configuration 0 = Parameters
1 = DHCP
P0851 IP1 address 0 a 255
P0852 IP2 address 0 a 255
P0853 IP3 address 0 a 255
P0854 IP4 address 0 a 255
P0855 CIDR (subnet mask)
0 = Reserved
1 = 128.0.0.0
2 = 192.0.0.0
3 = 224.0.0.0
4 = 240.0.0.0
5 = 248.0.0.0
6 = 252.0.0.0
7 = 254.0.0.0
8 = 255.0.0.0
9 = 255.128.0.0
10 = 255.192.0.0
11 = 255.224.0.0
12 = 255.240.0.0
13 = 255.248.0.0
14 = 255.252.0.0
15 = 255.254.0.0 16 = 255.255.0.0
17 = 255.255.128.0
18 = 255.255.192.0
19 = 255.255.224.0
20 = 255.255.240.0
21 = 255.255.248.0
22 = 255.255.252.0
23 = 255.255.254.0
24 = 255.255.255.0
25 = 255.255.255.128
26 = 255.255.255.192
27 = 255.255.255.224
28 = 255.255.255.240
29 = 255.255.255.248
30 = 255.255.255.252
31 = 255.255.255.254
P0856 Gateway 1 0 a 255
P0857 Gateway 2 0 a 255
P0858 Gateway 3 0 a 255
P0859 Gateway 4 0 a 255
P0860 MBTCP: communication status 0 = Inactive
1 = No connection
2 = Connected
3 = Timeout error
P0863 MBTCP: Active connections 0 a 4
P0865 MBTCP: TCP port 0 a 9999
P0868 MBTCP: Timeout 0 a 999,9s
P0806 Modbus TCP Watchdog 0 a 65,5 s
5.4.3 POSSIBLE FORMS OF CONNECTIONS
Figure 5.7 illustrates the possible ways to connect the CFW300 to the Drive Scan.
Low Voltage Devices | 5-12