WEG Drive Scan, Manual

Page: 24 / 74

5
CONNECTING A DEVICE TO THE DRIVE SCAN
Table 5.5: Parameters related to the MODBUSTCP-05, ETHERNETIP-05 and PROFINETIO-05 accessories
Parameter Description Values range
P0848 CIDR (subnet mask)
0 = Reserved
1 = 128.0.0.0
2 = 192.0.0.0
3 = 224.0.0.0
4 = 240.0.0.0
5 = 248.0.0.0
6 = 252.0.0.0
7 = 254.0.0.0
8 = 255.0.0.0
9 = 255.128.0.0
10 = 255.192.0.0
11 = 255.224.0.0
12 = 255.240.0.0
13 = 255.248.0.0
14 = 255.252.0.0
15 = 255.254.0.0 16 = 255.255.0.0
17 = 255.255.128.0
18 = 255.255.192.0
19 = 255.255.224.0
20 = 255.255.240.0
21 = 255.255.248.0
22 = 255.255.252.0
23 = 255.255.254.0
24 = 255.255.255.0
25 = 255.255.255.128
26 = 255.255.255.192
27 = 255.255.255.224
28 = 255.255.255.240
29 = 255.255.255.248
30 = 255.255.255.252
31 = 255.255.255.254
P0849 Gateway 1 0 a 255
P0850 Gateway 2 0 a 255
P0851 Gateway 3 0 a 255
P0852 Gateway 4 0 a 255
Figure 5.4 illustrates an Ethernet network among the CFW11 inverters using all the communication modules.
Eth1
1 2
3 4
Drive Scan
Switch
1 2 3
CFW-11
MODBUSTCP-05 ETHERNETIP-05 PROFINETIO-05
Figure 5.4: Ethernet network among several CFW11 and a Drive Scan
Note that to establish a network with more than one inverter, it is necessary to use a switch. It is important to
remember that the inverters in an Ethernet network must have different IP values.
5.2.3 POSSIBLE FORMS OF CONNECTIONS
Figure 5.5 illustrates the possible ways to connect the CFW11 to the Drive Scan.
Low Voltage Devices | 5-5