Webdyn WebdynSunPM, User Manual

Page: 122 / 168

122
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
•
port : the port server 1 is configured on
•
last : the date and time the concentrator last connected to server 1 and the connection
result in the following format: “DD/MM HH :MM <connection result>”
6/6
srv=<server>
status=<status>
type=<type>
mode=<mode>
addr=<ipaddr>
port=<port>
last=
•
server : configured server 2 name
•
status : indicates whether server 2 is enabled or not. The possible values are:
o
enabled : server 2 is enabled
o
disabled : server 2 is disabled
•
type : indicates the server type. The possible values are:
o
ftp : server 2 is of the FTP type
o
sftp : server 2 is of the SFTP type
o
mqtt : server 2 is of the MQTT type
o
mqtts : server 2 is of the MQTTS type
•
mode : the server 2 running mode. The possible values are:
o
strategy_wsun1_compliant_backup : the server is an FTP type server and is
configured as a backup server
o
strategy_wsun1_compliant : the server is an FTP typoe server and is configured
as the main server
o
strategy_wsun1_compliant_backup_secured : the server is an SFTP type server
and is configured as a backup server
o
strategy_wsun1_compliant_secured : the server is an SFTP type server and is
configured as a backup server
•
ipaddr : configured server 2 address
•
port : the port server 2 is configured on
•
last : the date nand time the concentrator last connected to server 2 and the
connection result in the following format: “DD/MM HH :MM <connection result>”
Syntax:
status
Parameters: None
3.3.6 SunSpec “detect” command
The “detect” command is used to launch a SunSpec scan on the modbus bus.
Syntax: