Webdyn WebdynSunPM, User Manual

Page: 83 / 168

83
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
It is therefore possible to enter the corresponding device:
As the device is of the “modbus TCP” type, the following fields are also displayed:
•
IP address : enter the modbusTCP device’s network IP address
•
Port : enter the port number to access the device. Usually 502
•
Slave address : the device’s modbus address
When the device is of the “modbus RTU” type, the following fields are displayed:
•
Serial port : the serial port to which the modbus slave is connected
•
RTU Slave address : the device’s modbus address
Once these parameters are entered, it is also possible to enter the data acquisition frequency
and a short device description.
When the configuration is satisfactory, click the validation button:
The new device then appears in the tree structure on the left of the screen: