Webdyn WebdynSunPM, User Manual

Page: 146 / 168

146
USER MANUAL – WebdynSunPM
Version 2.05
préliminaire
The WebdynSunPM concentrator can be updated locally using the web interface or remotely
by FTP. The latest firmware version (“WebdynSunPM_x.x.x.zip”) is available for downloading
from our web site at the following address:
https://www.webdyn.com/support/webdynsunpm/
Once the download is complete, unzip the file with contains 2 files:
•
“wgapp_x.x.x.xxxxx.spm” which is the con centrator firmware,
•
“CheckSumx.x.x.txt” which contains the firmware checksum.
Using the web interface
To update the concentrator locally, go to the “System” tab on its web interface, then “Update”
and follow the update procedure using the web interface (see section 3.2.3.2 : “ Update ”).
Using FTP/SFTP
For remote updates, follow the steps below:
1. Place the “wgapp_x.x.x.xxxxx.spm” file containing the updates in the “BIN” directory
on the remote server.
2. Edit the “<uid>_config_.ini” file (<uid>: Concentrator identifier) which is in the
“CONFIG” directory on the FTP server. Put the file name that has just been uploaded
to the “BIN” directory in the “BIN_FileName” variable and enter the checksum
indicated in the “CheckSumx.x.x.txt” file in the “BIN_Checksum” variable.
The concentrator will retrieve its configuration file and its new firmware at the next
connection to the FTP server.
The update using FTP can only be carried out by the primary server.
The
application of the update can be seen in the LOG files uploaded to the “LOG” directory on
the FTP server.
Once the update has been applied, the firmware file can be deleted and the “BIN_FleName”
and “BIN_Checksum” variables in the “<uid>_config.ini” file
can be emptied.
If there is an error during the update, it will not be re-attempted.
The failure to follow the order of the previously described steps will lead to the
failure of the concentrator update.