37
37
EXHAUST
GUIDE
REMOVAL
ANGEL™ 4
EXHAUST GUIDE REMOVAL
· Remove the grip cheek cover by removing the 6 retaining screws
and
using a
metric 2.5mm A/F Allen key.
· Unplug the battery and solenoid plugs .
· Remove the 2 grip frame screws
holding the frame to the body using a suitable
3mm A/F Allen key.
· Remove the grip frame
from the body.
· Ensure the SENSI™ rod
is not lost.
· Pull out the exhaust valve retaining pin
located in the body using suitable grips.
· Remove the right end cap
or volumizer.
· Remove the valve spring support bobbin .
· Remove the valve spring .
· Remove exhaust valve stem .
· Using a suitable blunt hooked pick carefully retract exhaust valve guide
by
inserting the pick into the exhaust valve hole that the exhaust valve stem located into.
· Inspect and service parts as necessary.
IMPORTANT NOTES: For re-assembly of components
· Care must be taken so that the bore is not scored or the seals damaged.
· Ensure the exhaust valve guide body is free from damage that may score the bore.
· Ensure you do not damage the exhaust valve guide sealing face.
· Ensure the location hole in the exhaust valve guide is in the correct orientation to
the lock hole within the main body prior to refitting.
· Slowly insert the valve guide pushing it down with a blunt soft faced rod.
· When the holes line up insert the lock pin into the hole.
· Ensure the SENSI™ rod is re-inserted.
· Ensure no wires become trapped between the body and grip frame during
re-assembly.
· Ensure the plugs are located in the correct sockets.
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 1
7
1 2 3 4 5 6
8 9 10 11 12 1
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
MAINTENANCE –
EXHAUST GUIDE REMOVAL
• Ensure a barrel blocking device is fitted to the ANGEL™
• Ensure the hopper is removed from the ANGEL™
• Ensure that there are no paintballs in the ANGEL™
• Always remove the first stage regulator and relieve all residual gas pressure
from the ANGEL™ before disassembly.
• The ANGEL™ can hold a small residual charge of gas, typically 2 shots, with the
first stage regulator removed. Always discharge the marker in a safe direction to
relieve this residual gas pressure.
m
WARNING
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
1 2 3 4 5 6
8 9 10 11 12 13
7
