background image

50

50

WDP LTD

EXPRESS

WARRANTY - USA/CAN ONLY

ANGEL™ 4

WDP LTD. EXPRESS WARRANTY

USA / CANADA ONLY

1. General Express Warranties. 

WDP Ltd. warrants to the buyer who is purchasing to place into use (Buyer) only, that the 
ANGEL™ (Product) shall be free from material manufacturing defects in materials and workmanship
for six months from the date 

of purchase, subject to the requirements, disclaimers and limitations of this Warranty. This is not a
Warranty of performance, but a limited Warranty as to the condition of the Product at the
beginning of the Warranty period, this Warranty is only against such defects and not against any
other failures such as, but not limited to, those due to wear and tear, exposure to the elements,
unusual operating environments, misuse, negligence, accident, alteration or repair in any respect
which, in the judgement of WDP Ltd., adversely affects the condition or operation of the Product.
Normal maintenance and perishable items such as seals, batteries, wiring, indicator lamps and
exhaust valves are excluded from this limited Warranty against defects. This Warranty is not
transferable and it may not be waived or expanded except in writing signed by WDP Ltd. The terms
and limitations of this Warranty shall also apply to any additional goods or information, which may
be distributed by WDP Ltd., relating to the ANGEL™. 

2. Disclaimer and Limitation of Express and Implied Warranties.

There are no express Warranties other than those contained in this Warranty. Whether or not the
Product is to be used exclusively by Buyer, there shall be no third party beneficiaries to this
Warranty herein. NO WARRANTY IS PROVIDED TO DISTRIBUTORS OR DEALERS EXCEPT AS MAY BE
EXPRESSLY PROVIDED IN A SEPARATE AGREEMENT OF SALE. All descriptions, illustrations of the
Product and other information in catalogues, brochures and price lists or otherwise provided by
WDP or others are intended for general information only. WDP Ltd., is not responsible for any errors
or omissions therein or for any loss or damage resulting from reliance on them. WDP Ltd., does not
warrant that the Product is in compliance with any law or industry standards, guidelines or
procedures. WDP Ltd. standard terms and conditions of sale also apply if Buyer is a direct
purchaser from WDP Ltd. WDP LTD. DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING, BUT NOT
LIMITED TO, THOSE OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. 

3. Remedy and Limitation of WDP Ltd. liability.

Defective or non-conforming Product or parts thereof discovered and returned to WDP Ltd. freight
prepaid, with proof of purchase, during the Warranty period shall be repaired or replaced by WDP
Ltd. without any additional charge and shipped to Buyer, FOB WDP Ltd. In lieu of repair or
replacement, if WDP Ltd. elects, WDP Ltd. may, upon return of such product and making a
determination of non- conformity or defect, keep the product and refund the purchase price paid

by Buyer. Buyer’s remedies shall be limited (even in the event of WDP Ltd. default of its Warranty
obligations) exclusively to those provided in this Warranty. UNDER NO CIRCUMSTANCES SHALL
WDP LTD. OR ANY SUPPLIER, DISTRIBUTOR, DEALER, OR OTHER PERSON BE LIABLE FOR
EXEMPLARY, PUNITIVE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, NOR FOR ANY AMOUNT IN
EXCESS OF THE BUYER’S PURCHASE PRICE. Buyer waives any causes of action or theories of
liability including, but not limited to, those arising under contract, tort, strict liability, Product
liability, statutes, or otherwise, except as to those specifically provided by the Uniform Commercial
Code (as adopted in Michigan) as excluded, modified and limited in this warranty. 

4. Additional Consumer Protection.

The products are offered for sale for end use in supervised commercial establishments where
professional safety codes are enforced, and not for personal, family or household use.
Nevertheless, if the Product is determined in a transaction to be a customer Product under
applicable law, the following provisions shall become applicable: 

(a) THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS OF THE PRODUCT FOR A
PARTICULAR PURPOSE THAT CANNOT BE DISCLAIMED ARE LIMITED IN DURATION TO THE INITIAL
EXPRESS WARRANTY PERIOD.

(b) Some states do not allow limitations on how long an implied Warranty lasts, so the above
limitation in (a) may not apply.

(c) Some states do not allow the exclusion or limitation of incidental or consequential damages, so
such limitations may not apply. 

(d) And this Warranty gives buyer specific legal rights, and buyer may also have other rights
provided for by law.

5. Parts, Service and Training performed by WDP Ltd. 

All Warranty and non-Warranty parts, labour and service, if any, provided by WDP Ltd. related to the
product are subject to all limitations and disclaimers of warranties and remedies provided in this
Warranty. The replacement or repair of a product by WDP Ltd. does not give rise to any new
Warranty except the Warranty period provided for herein shall be extended by the length of any
period in which defective or non-conforming product is in possession of WDP Ltd. WDP Ltd. may
have access to the Product after purchase of the Product. WDP Ltd. is not under any duty to inspect
the product for any defects or any improper use or modification of the Product, nor to correct or
advise anyone of any such condition, use or modification, which is observed. Any notification,
which may be given, is voluntary and subject to all limitations and disclaimers in this Warranty.

APPENDIX –

WDP LTD. EXPRESS WARRANTY - USA/CAN ONLY

 

Summary of Contents for ANGEL





















































Reviews: