WDP ANGEL, Operator'S Manual

Page: 44 / 52

44
44
VERNIER
TRIGGER WHEEL
REMOVAL
ANGEL™ 4
IMPORTANT NOTES: For re-assembly of components
· Should you be unsure of the original position of the vernier wheels follow the
procedure listed below for re-assembly.
· Ensure the vernier wheel locking screws is backed off by rotating counter
clockwise.
· Ensure the vernier trigger toe adjuster screw is backed off by rotating counter
clockwise.
· It is important that the vernier wheels are inserted in position shown above,
this is to ensure that you start with maximum range of adjustment
· Verify the correct vernier wheel position by the indicators on the wheels
· Ensure the SENSi™ rod
is re-inserted.
· Re-attach the frame.
· Ensure no wires become trapped between the body and grip frame during
re-assembly.
· Ensure the plugs are located in the correct sockets.
· Adjust the trigger as per the VERNIER TRIGGER ADJUSTMENT procedure - page
42.
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
MAINTENANCE – VERNIER TRIGGER WHEEL REMOVAL
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
A
A
A