Herramientas
necesarias:
23
Por favor, no devuelva este producto al establecimiento de compra.
Contacte a su concesionario local de Wayne-Dalton. Para encontrar su
concesionario local de Wayne-Dalton, consulte las páginas amarillas/listados empresariales, o bien, diríjase en conexión a red a la sección
“Find a Dealer” (“Encuentre un concesionario”) en www.Wayne-Dalton.com.
Instalación del idrive
®
NOTA:
Para obtener información sobre piezas
de repuesto, consultar las Instrucciones de
instalación y Manual del propietario del
idrive
®
.
IMPORTANTE:
EL LADO DERECHO E
IZQUIERDO SE DETERMINAN SIEMPRE DESDE
EL INTERIOR DEL EDIFICIO VIENDO HACIA
AFUERA.
Con el tubo de resorte(s) TorqueMaster
®
sobre el piso (dentro del garaje) frente a la
puerta, con el extremo etiquetado a la
izquierda, echarle un vistazo al interior del
lado izquierdo del accionador para verificar
que el cojinete izquierdo y la camisa interna
(negra) estén alineados con el perfil del tubo
de resorte(s) TorqueMaster
®
.
IMPORTANTE:
SUJETAR EL ACCIONADOR
POR LA CUBIERTA PRINCIPAL. NO SUJETARLO
POR EL MOTOR.
NOTA:
El accionador no desliza sobre la
etiqueta del tubo de torsión. Si se intenta des-
lizar el accionador sobre el extremo iz quierdo
del tubo de resorte(s) TorqueMaster
®
, se
podría dañar los componentes electrónicos
internos.
Una vez alineado, deslizar el accionador
sobre el extremo derecho del tubo de
resorte(s) TorqueMaster
®
. A medida que el
tubo de resorte(s) TorqueMaster
®
entra en la
camisa interna (negra), rotar el accionador en
un leve vaivén para facilitar el alineamiento.
Continuar el deslizamiento del accionador
sobre el tubo de resorte(s) TorqueMaster
®
.
Alinear el cojinete derecho con el tubo de
resorte(s) TorqueMaster
®
y deslizar el
accionador completamente sobre el tubo de
resorte(s) TorqueMaster
®
hasta que el tubo
de resorte(s) TorqueMaster
®
salga del
cojinete derecho del accionador.
NOTA:
No forzar el accionador sobre el tubo
de resorte(s) TorqueMaster
®
si hay
desalineamiento.
Continuar el deslizamiento del accionador
hacia el centro del tubo de resorte(s)
TorqueMaster
®
.
Enchufar el cordón eléctrico del motor en el
accionador.
PERFILES ALINEADOS DEL LADO
IZQUIERDO DEL TUBO DE RESORTE(S)
TORQUEMASTER
®
Y DEL COJINETE
LADO DERECHO DEL
TUBO DE RESORTE(S)
TORQUEMASTER
®
PERFILES ALINEADOS DEL
LADO DERECHO DEL
TUBO DE RESORTE(S)
TORQUEMASTER
®
Y
DEL COJINETE
ENCHUFAR EL CORDÓN
DE ALIMENTACIÓN
MOTOR
19