Tools Needed:
27
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer
section online at
www.Wayne-Dalton.com
23
CENTER
BRACKET
BUSHING
ASSEMBLY
(2) 5/16” X 1-5/8”
HEX HEAD LAG
SCREWS
NOTE:
If you are installing the
i
drive
®
opener on your garage door, skip this step
and continue with Step 24.
NOTE:
If you are not installing the
i
drive
®
opener on your garage door, you
must install the center bracket bushing
assembly. Follow these instructions for
non-
i
drive
®
operated garage doors.
NOTE:
If you are installing a DoorMaster
™
opener, see optional DoorMaster
™
Bracket
installations on page 40, Figure B.
To locate the center bracket, mark the
header halfway between the flagangles
and level the TorqueMaster
®
spring tube.
Drill 1/8” pilot holes into header for the
lag screws. Fasten the metal bracket to
the header using (2) 5/16” X 1-5/8” lag
screws.
NOTE:
Upon completion of this step, con-
tinue with Step 28.
Securing Center Bracket
Assembly
INST
ALLA
TION
Power Drill
1/8” Drill Bit
7/16” Socket
Driver