43
MODEL MS1000
Battery Pack Location and Installation
The MS1000 battery pack is located on the back of the unit. To
remove or replace the battery pack, pull the notched tab downward,
and lift up the battery pack.
To install the battery pack, insert the bottom of the pack into the
groove and press down on the battery pack until it clicks into place.
Charging the Battery Pack
To recharge the battery pack, plug the AC adapter into the unit.
The unit will reach fully charged in 16 hours with unit off, and 30
hours with unit operating.
Battery Tips
The MS1000 is shipped from the factory only with a light charge.
You should recharge the battery upon receipt of your unit to ensure
a full charge.
To maximize battery life, set Auto Shutoff to 1 minute and Back-
light Shutoff to "always off".These items are described in the
Global Configuration section.
B
Appendix B:
Power
Management
and Battery
